Categories
Uncategorized

X-i1100

X-i1100

THE HEIR

Advance Paris, the French manufacturer of high fidelity presents the latest of its CLASSIC range designed for the demanding music lovers. This new integrated amplifier has numerous technical advantages. We thus confirm our desire to leave nothing to chance and optimize each of the modules that make up this integrated amplifier. We get a device with many possibilities, operated intuitively, thanks to an ergonomics that can reference, and above all flawless and blameless musicality, all offered at a very competitive price, compared to the huge potential of X- i1100. The X-i1100 has no less than six inputs, including a mobile magnet phono, an asymmetrical and symmetrical CD, a tuner, two auxiliaries and a direct «Amp ln» input. The digital inputs are also numerous: a USB, an AES, and six S / PDIF including four optics. The outputs have not been forgotten: one dedicated to asymmetrical line recording and one preamplifier output, in order to connect an additional power block to the X-i1100. The X-i1100 can drive any type of passive speaker with its efficient 220W per channel under 8Ω ( 400W under 4Ω €! ) Relying on a toroidal transformer of 700VA and 60000uF filtering capacity. The preamplification stage has been designed with switching relays as close as possible to the inputs.  

The DAC has two digital signal receivers: an X-Mos processor and a USB3318 with jitter correction for the USB input and a Cirrus Logic CS8416 for all the others, AES and S / PDIF. The converter chosen, a Burr Brown PCM1796, handles signals up to 192 kHz under 24 bits. Metal film resistors and polypropylene capacitors contribute to the quality of reproduction of this integrated amplifier. Mounted on large heat sinks, the amplifier boards, connected to the output terminals by means of cables with a cross section of 4 mm2, have a triple push-pull per channel, thus three pairs of bipolar transistors NJW0281G and NJW0302G.
The X-i1100 can operate up to 45 W in a mode similar to class A and switches to class AB beyond, when the «High Bias» switch located on the back of the device is activated. Mechanical engineering was also well designed: five compartments forming as many galvanic isolations and contributing to the rigidity of the X-i1100 are integrated into the chassis. Chassis made of steel with black aluminum sides as well as a perforated cover ensures optimum ventilation of the X-i1100.

SPECIFICATIONS

POWER OUTPUT : 2x220W / 8Ω 2x400W / 4Ω
FREQUENCY RESPONSE : (-3dB) 10Hz-70kHz
TONE CONTROL : +/- 10 dB
DISTORSION : < 0,025%
S/N RATIO : > 102 dB
CHANNEL SEPARATION : > 75 dB
INPUT IMPEDANCE : 47KΩ Unbal. / bal. 47KΩ
DAC DIGITAL AUDIO : BurrBrown PCM1796
CONVERTER 24bit-192kHz USB B DAC : XMOS USB3318 / 24bits 192kHz
Adaptive for playback / asynchronous for record
IN LEVEL (CD/AUX…) : 500mV
INPUT LEVEL PHONO MM : 7mV
AC INPUT : 115-230V
POWER CONSUMPTION MAX : <700W (StandBy < 0,5W)
TRANSFORMER(S) : 1 (700VA)
DIMENSIONS : H.210 x l.430 x D.476
NET WEIGHT / GROSS WEIGHT : 21,4 kg

Categories
Uncategorized

PlayStream A7

PlayStream A7

THE CENTER OF YOUR SYSTEM

The PlayStream A7 is a connected integrated amplifier.
With a power of 2x115W / 8Ω in class AB, the A7 was designed with the ultimate goal of satisfying the demanding audiophile.
Its sound reproduction is uncompromising, compatible with all new high definition sources.
The A7 integrates an ethernet and wifi network player including many services like Spotify, Deezer, Qobuz, Tidal, TuneIn, iHeartRadio, vTuner, Napster, etc., it allows network playback of your music library stored on your smartphone, tablet, computer or network drive such as NAS (Synology).
A DAB + digital tuner, an FM tuner, 4 digital inputs including a coaxial and 3 optical, a HDMI ARC, a USB input as well as 6 analog inputs including a configurable phono input equip the PlayStream A7.
The PlayStream A7 is compatible with our Bluetooth compatible receivers X-FTB01 and new X-FTB02 incorporating high definition HD aptX.
Equipped with High-Bias, the PlayStream A7 delivers sound comparable to Class A on the first watts.
DLNA and Airplay compatible.
To discover !

SPECIFICATIONS

OUTPUT POWER 8Ω : 115W
OUTPUT  LEVEL unbalanced (max volume) : 9 volts
FREQUENCY  RESPONSE  (+/-3dB) : 20Hz – 80  kHz
DISTORTION < 0.004% @1KHz/24W     
SIGNAL TO NOISE HN : 98dB
OUTPUT IMPEDANCE : 10KΩ
DAC DIGITAL AUDIO AKM : AK4490 or PCM1796 
DIGITAL AUDIO PCM TRANSCEIVER : AK4118 or MS8416
* Optical input supporting : 24bit – 96kHz PCM
* Coaxial input supporting : 24bit – 192kHz PCM
AC INPUT : 115/230V 50/60Hz
POWER  CONSUMPTION  MAX : Max. 400W
DIMENSIONS : l. 430 x  D. 370  x  H. 135
NET/GROSS  WEIGHT : 9,3Kg / 11,15Kg

Categories
Uncategorized

PlayStream A5

PlayStream A5

THE CENTER OF YOUR SYSTEM

The PlayStream A5 is a connected integrated amplifier.
With a power of 2x80W / 8Ω in class AB, the A5 was designed with the ultimate goal of satisfying the demanding audiophile.
Its sound reproduction is uncompromising, compatible with all new high definition sources.
The A5 integrates an ethernet and wifi network player including many services like Spotify, Deezer, Qobuz, Tidal, TuneIn, iHeartRadio, vTuner, Napster, etc., it allows network playback of your music library stored on your smartphone, tablet, computer or network drive such as NAS (Synology).
A DAB + digital tuner, an FM tuner, 4 digital inputs including a coaxial and 3 optical, a USB input as well as 6 analog inputs including a configurable phono input equip the PlayStream A5.
The PlayStream A5 is compatible with our new Bluetooth compatible receivers X-FTB01 and X-FTB02  incorporating high definition HD aptX.
Equipped with High-Bias, the PlayStream A5 delivers sound comparable to Class A on the first watts.
DLNA and Airplay compatible.
To discover !

SPECIFICATIONS

OUTPUT POWER 8Ω : 80W
OUTPUT LEVEL  Unbalanced (max volume) : 9 volts
FREQUENCY  RESPONSE  (+/-3dB) : 20Hz – 80  kHz
DISTORTION  < 0.004% @1KHz/24W
SIGNAL TO NOISE HN : 98dB
OUTPUT IMPEDANCE : 10KΩ
DAC  DIGITAL : WM8740 or PCM1796  
TRANSCEIVER : AK4113 or MS8416
* Optical input supporting : 24bit – 96kHz PCM
* Coaxial input supporting : 24bit – 192kHz PCM
AC  INPUT : 115/230V 50/60Hz
POWER  CONSUMPTION  MAX : Max. 300W
DIMENSIONS : l. 430 x  D. 370  x  H. 135
NET/GROSS  WEIGHT : 8,1Kg / 9,75Kg

Categories
Uncategorized

MyConnect 150

MyConnect 150

AN AUDIOPHILE ALL-IN-ONE REALLY UNIVERSAL !
All-in-One system with built-in tubes

The MyConnect 150 is a built-in stereo system with tubes for the attention of discerning audiophiles.
Equipped with a tube preamplifier, the MyConnect 150 shines by the exceptional musicality it delivers worthy of the best separate electronics.
Its amplifying section of 2x150W will drive brilliantly the most difficult speakers, allowing a sound reproduction of high level.
Multisources, the MyConnect 150 is particularly versatile to reproduce dematerialized sources as well as physical sources: it integrates a network player for reading your music library from your smartphone, your tablet, your PC or MAC, your hard network or your USB, CD.
It is drived from our Advance playstream app available on the AppStore or GooglePlay. It integrates the best streaming services like Spotify, Qobuz, Deezer, Tidal, TuneIn and many others.
In addition to the network drive, it has a CD player, a FM tuner, a DAB / DAB + tuner, a Bluetooth port compatible with the high-definition X-FTB2 dongle (or X-FT01), an X-MOS USB-B input for direct connection of a PC or MAC.


SPECIFICATIONS
POWER OUTPUT 8Ω, 4Ω and 2,66Ω 130W, 190W and 250W CLASS AB
OUTPUT LEVEL Unbalanced (max volume) 9 volts
FREQUENCY RESPONSE (+/-3dB) 2 0Hz – 80 kHz
DISTORTION < 0.006% @1KHz/1W
SIGNAL TO NOISE HN 105dB
OUTPUT IMPEDANCE 10KΩ
CHANNEL SEPARATION > 110dB
DAC DIGITAL AUDIO AKM AK4490 (32bit – 768kHz)
DIGITAL AUDIO PCM TRANSCEIVER AK4118
INTERFACE DE RECEPTION USB/DSD
* Optical input supporting : 24bit – 96kHz PCM
* Coaxial input supporting : 24bit – 192kHz PCM
* USB audio PCM input supporting 24bit/32bit 44,1kHz – 384kHz
* USB audio PCM input supporting 2.8MHz (DSD64)-DOP/5.6MHz, (DSD128)-DOP/11.2MHz (DSD 256)-DOP
AC INPUT 115/230V 50/60Hz
TENSION SECTEUR
POWER CONSUMPTION MAX Max 900W
CONSOMMATION MAXIMALE
DIMENSIONS H. 170 x l. 371 x D. 430
NET WEIGHT 14,5 KG
Gross WEIGHT 17,2 KG

Categories
Uncategorized

X-Stream 9

X-Stream 9

Advance Paris has been passionately designing products for demanding audiophiles for more than 20 years.
The universal source X-Stream 9 is no exception to the rule. It will satisfy the lover of quality sound on all its sources. The doors of high definition audio will be open to him!

The X-Stream 9 is a network drive, a DAC, a CD player, a PC / MAC drive via its USB-B X-MOS asynchronous input and a digital DAB / DAB + and FM tuner.
Whatever the files of your favorite music – PC or MAC computer, smartphone, tablet, network hard disk, NAS or CD disc, you could enjoy a sound quality of the highest level.
“Without limit” was our philosophy regarding the design of our universal source. Our engineers have integrated the best technologies with the unique condition that the results obtained result in a soothing listening without aggressiveness of total purity.
The audio output stage as well as the decoding part have been particularly cured. Signal conversion is supported by the AK4490 from AKM.

 

 

 

The AK4490 is part of a new generation of high-end 32-bit DACs based on AKM’s VELVET SOUND architecture, which has been widely adopted by established high-end audio companies. This technology delivers high-quality sound detail with its low-distortion architecture, in addition to 32-bit resolution digital filter processing.
The AK4490 supports up to 768kHz PCM and 11.2MHz DSD (Direct Stream Digital), suitable for playback of high-resolution audio sources. Five digital filters are integrated in the DAC thus optimizing the sound reproduction.
The AK4490EQ is suitable for converting high-resolution sound sources that the X-Stream 9 masters perfectly.
Combined with our low audio stage, this low-distortion DAC (-112dB based on a signal-to-noise ratio of over 120dB) will increase your listening pleasure!

The network player part of the X-Stream 9 allows to manage the streaming services (Spotify, Qobuz …), several thousand local, national and global radios, reading your music stored locally on your computer or network drive. Compatible with Airplay and DLNA.
Control of your network drive can be done via the ADVANCE PLAYSTREAM app that can be downloaded from the AppStore and Google Play.

 

 

The X-Stream 9 has a CD player integrating the latest generation of servo Tamul ensuring a stable and qualitative playback of your CDs. The solution used combines a 16-bit processor and a 24-bit DSP. It supports CD, CD-R / RW, CD-DA (MP3 / WMA) playback.

Our universal source is also equipped with an USB-B X-MOS input for direct connection of your PC or MAC computer. This 32-bit / 8-core asynchronous “high-speed” input enables playback of all types of files up to DSD 5,6GHz.

The X’Stream 9 can be set to variable or fixed output for a perfect match with the input level of your integrated amplifier. The volume will be controlled from the remote control or via the device itself.

The X-Stream 9 is also a DAC, it has 3 optical inputs and 2 optical inputs.
In addition, our player has both balanced (XLR) and unbalanced analog stereo (RCA) stereo outputs as well as two optical and coaxial digital outputs.

The X-Stream 9 includes a Bluetooth Direct Digital (BDD) port for connecting our X-FTB 01 digital Bluetooth receiver. This receiver incorporates the APTX which ensures CD quality on all your sources.

 

SPECIFICATIONS

  • OUTPUT LEVEL Unbalanced 2 volts
  • OUTPUT LEVEL balanced 4 volts
  • FREQUENCY RESPONSE (+/-3dB) 20Hz – 45 kHz
  • DISTORTION < 0.005%
  • OUTPUT IMPEDANCE 10KΩ
  • CHANNEL SEPARATION > 110dB
  • S/N RATIO > 110dB
  • DAC DIGITAL AUDIO 32bit-768kHz AK4490
  • DIGITAL AUDIO PCM TRANSCEIVER AK4118
  • USB AUDIO / DSD XMOS XU208-256
  • AC INPUT 115 or 230V
  • POWER CONSUMPTION MAX Max 30W
  • DIMENSIONS H. 130 x l. 230 x D. 310
  • NET WEIGHT / GROSS WEIGHT 3,8 kg / 5,4 kg
  • 2.4G Wi-Fi network compatibility: IEEE 802.11b/g/n
  • Wi-Fi transmitter frequency range: 2412 – 2472MHz (2.4GHz ISM Band, USA 11 Channels, Europe and others 13 Channels)
  • Wi-Fi transmitter power: <20dBm (EIRP)
  • Wi-Fi modulation: OFDM, DSSS, DBPSK, DQPSK, CCK, 16QAM, 64QAM
Categories
Uncategorized

X-Cd5

X-Cd5

The X-Cd5, new CD player combines a superb presentation to a perfect technical accuracy.
The X-Cd5 is composed of a metal frame that reduces the risk of interference between the different components of your Hi-Fi system. The metal mechanical component is suspended in order to avoid the development of vibrations during playback.

Nothing has been left to chance, all resistors and capacitors are “audiophiles”components. The audio output stage was carefully designed, bringing a great softness and real natural musical rendition, outstanding in its category.The X-Cd5 can read CD – CDR – MP3 and Hybrid SACD. The converter 24 bits – 192 kHz, ensures outstanding performing ability. The switched-mode power supply provides electrical power to the different circuits.

The CD player , X-Cd5 provides two stereo analog outputs, one balanced (XLR) and one unbalanced (RCA) as two digital outputs, one optican and one coaxial. One USB allows to connect an USB key with music files, those are drive by the remote control.

Without any signal, those products turn automatically on stanby mode after around 30 minutes. This was done for energy-savings, in order to follow EC rules.

The remote control device will make it easier to use.



SPECIFICATIONS

Output Level : 2V (unbalanced)
Output Level : 3,87V (balanced)
Frequency Response (+/-1db) : 20Hz à 20 kHz
Distorsion < 0.005%
Output Impedance : 10KΩ
Channel Separation : 105dB
Signal Noise ratio : 97 dB
Convertor Wolfson WM8761 : 24bit-192kHz
AC Input : 115V-230V
Power Consumption < 8W
Dimensions (H/W(D) 70x430x257mm
Net Weight : 4,95 kg

Categories
Uncategorized

X-Cd 1000 ADVANCE PARIS

X-Cd 1000 ADVANCE PARIS

Pure sound, pure line that is the CD player Advance Paris X-Cd1000. X-cd1000 is composed of a rigid partitioned chassis, ensuring efficient insulation. Thus it eliminates any risk of interference between the different circuits in the device. All the components are « Audiophile components. The power toroïdal transformer is higher than the real needs of the X-cd1000. The Burr Brown converter PCM 1792 is really great for detail, melody and dynamics reproduction, with an outstanding signal noise ratio.

The audio output stage was carefully researched, and offers several possibilities :

-RCA output without tubes
-RCA output with tubes
-XLR output with tubes
-AES/EBU digital output-Coaxial digital output
-Optical digital output

The X-Cd1000 can read CD – CDR – MP3 and Hybrid SACD.
A global remote control device delivered with the X-cd1000 makes it easier to use.

Specifications :

– Output level RCA Without tubes : 2 V
– Output level RCA With tubes : 2.25V
– Output level Balanced : 2.24V
– Frequency response : 20-35KHz (±1.5dB )
– Distortion of the output with tubes: THD=0.008%
– Distortion without tubes :: THD=0.01%
– Channel separation on output with tubes: : 101dB
– Channel separation on output without tubes : 101dB
– Signal noise ratio with tubes :103dB
– Sinal noise ratio without tubes : 103dB
– Output impedance XLR-RCA : 10KΩ
– Converter Burr Brown : PCM1792
– AC power 115 / 230 V
– Transformer : 50W
– Max power consumption : 23W
– Dimensions (cm) : W = 43 x D = 37,2 x H = 10,9
– Weight : 9.2 kgs

Categories
Uncategorized

X-i50BT

X-i50BT

AVAILABLE JANUARY 2016


The X-i50BT, real audiophile design,allows numerous analog sources connections, even the use of a turntable.
For the users of dematarialised music content in computers, tablets or smartphones, it includes a compatible bluetooth receiver that allows a wireless communication .

Its power of 2 x 50 Watts RMS into 8 Ohms, its « Hi Bias » function will allow it to supply easily most of the loudspeakers found on the market.

Its complete remote control device will make it easier to use.

SPECIFICATIONS :

Output Power 8 Ω : 2 X 50 W RMS
Output Power 4 Ω : 2 X 65 W RMS
Frequency Response (-3dB): 10 Hz – 30 kHz
Tone Control : +/- 10 dB
Distortion : < 0,15%
S/N Ratio > 85 dB
Channel Separation > 70 dB
Bluetooth A2DP
Input Impedance : 10 kΩ
Phono Input Impedance : 47 kΩ
In Level of Aux Inputs : < 550 mV
Amp in Level < 1.25 V
Phono Stage Input Level : 2.5 mV
AC Input : 230V
1 toroïdal transformer
Dimensions : H.11 cm x W.43 cm x D.32 cm
Net Weight: 6 kg

Inputs /Outputs :

1 MM phono
1 CD
1 Tuner
4 Auxiliaries
1 PC2
1 USB for MP3 keys
Ampli – Preamp can be disconnected
1 pair speakers

Categories
Uncategorized

X-i 75

X-i 75

New Advance Acoustic integrated amplifiers X-i75 has a sober and elegant presentation.

They have numerous possibilities for both analog and digital use, benefitting from the latest technical innovations.
Combined with the best components available at this time, they allowed to the listening, an exceptional rendering for dynamics without agressiveness,but reproducing the details of the music.

The « Hi Bias » function allows it to supply easily most of the loudspeakers sold on the market.

Its complete remote control device will make it easier to use.

SPECIFICATIONS

Power 8 Ω : 2x75W RMS
Power 4 Ω : 2x110W RMS
Frequency response (-3dB) 10Hz-35kHz
Tone Control +/- 10 dB
Distorsion < 0,1%
Signal/Noise ratio > 90 dB
Channel Separation > 70 dB
Input Impedance 47KΩ
Phono Input Impedance 47KΩ
Digital audio Converter AK4113 low jitter
Converter 24bit-192kHz
USB B Converter Wolfson WM8740
X-MOS Asynchrone
In Level (CD/AUX…) < 300mV
In Level Amplifier < 1,1V
Phono MM Input Level 2,5mV
Bluetooth Module APTX – AAC (Optional module : X-FTB01)
AC Input 115-230V
Power Consumption : 300W (X-i75)
Transformer (1)
Dimensions (cm) H12 cm x W.43 cm x D.32 cm
Net Weight : 8,6 kg (X-i75)

 

Analog Inputs :

1 phono MM input
1 CD input
1 Tuner input
4 Auxiliaries inputs
1 PC2 analog input
1 Record output
1 output for Subwoofer
Amplifier –Preamplifier can be disconnected

Digital Inputs :

2 Coaxial inputs
1 Optical inputs
1 Asynchronous USB B X-MOS input
1 USB A input for USB Key with MP3 files
1 module Bluetooth input 24 bits x 48 kHz (Optional module X-FTB01)

 

Outputs :

1 Paire of loudspeakers
1 headphones plug
1 X 5 Volts output for WTX 500

Adjustment :

– Volume
– Balance
– Bass
– Trebble
– Bypass
-Hi Bias switch

Categories
Uncategorized

X-A1200 ADVANCE PARIS

X-A1200 ADVANCE PARIS

To meet the expectations of the most demanding music lovers, who pay special attention to the final output of their audio system, and dedicate an important part of their free time listening to music, we designed the Advance Paris Mono power amplifier X-A1200.

Because of its musical performance together with its smart presentation, the monophonic power amplifier X-A1200 is an awesome piece of equipment.. A mono amplifier is ideal for improving the overall performance of a Hi-Fi system. Indeed, this principle prevents any interaction between power supply circuits as well as between the left channel and the right channel of the amplifier.

The high power supply associated with the 10 « very high current » power transistors (NJW0281G – NJW0302G), allo to the mono amplifier X-A1200 to deliver a power of 450 Watts RMS into 8 Ω and more than 700 W RMS into 4Ω. Combined with its “Hi Bias” function, the X-A1200 will drive easily all the speakers found on the market. The X-A1200 provides a power of 450 W per channel in class AB.

SPECIFICATIONS

Power Output 8 Ω > 450 W
Power Output 4 Ω > 700 W
Frequency Response : 10 Hz – 80 kHz
Distorsion:≤ 0.003%
S/N Ratio:≥113db
Input Impedance Unbalance : 32 kΩ
Input Impedance Balance : 38 kΩ
Standby Power Consumption : 0,45W
Gain : 34,2db ± 1dB
Power Transformer:1000 W
Stand By : 0,42 W
Dimensions : H.23,5 cm W.43 cm D.45 cm
Net Weight: 25,5 kg

We use cookies to personalise content and ads, to provide social media features and to analyse our traffic. We also share information about your use of our site with our social media, advertising and analytics partners. View more
Cookies settings
Accept
Privacy & Cookie policy
Privacy & Cookies policy
Cookie name Active

Who we are

Suggested text: Our website address is: https://advanceparis.ro.

Comments

Suggested text: When visitors leave comments on the site we collect the data shown in the comments form, and also the visitor’s IP address and browser user agent string to help spam detection.

An anonymized string created from your email address (also called a hash) may be provided to the Gravatar service to see if you are using it. The Gravatar service privacy policy is available here: https://automattic.com/privacy/. After approval of your comment, your profile picture is visible to the public in the context of your comment.

Media

Suggested text: If you upload images to the website, you should avoid uploading images with embedded location data (EXIF GPS) included. Visitors to the website can download and extract any location data from images on the website.

Cookies

Suggested text: If you leave a comment on our site you may opt-in to saving your name, email address and website in cookies. These are for your convenience so that you do not have to fill in your details again when you leave another comment. These cookies will last for one year.

If you visit our login page, we will set a temporary cookie to determine if your browser accepts cookies. This cookie contains no personal data and is discarded when you close your browser.

When you log in, we will also set up several cookies to save your login information and your screen display choices. Login cookies last for two days, and screen options cookies last for a year. If you select "Remember Me", your login will persist for two weeks. If you log out of your account, the login cookies will be removed.

If you edit or publish an article, an additional cookie will be saved in your browser. This cookie includes no personal data and simply indicates the post ID of the article you just edited. It expires after 1 day.

Embedded content from other websites

Suggested text: Articles on this site may include embedded content (e.g. videos, images, articles, etc.). Embedded content from other websites behaves in the exact same way as if the visitor has visited the other website.

These websites may collect data about you, use cookies, embed additional third-party tracking, and monitor your interaction with that embedded content, including tracking your interaction with the embedded content if you have an account and are logged in to that website.

Who we share your data with

Suggested text: If you request a password reset, your IP address will be included in the reset email.

How long we retain your data

Suggested text: If you leave a comment, the comment and its metadata are retained indefinitely. This is so we can recognize and approve any follow-up comments automatically instead of holding them in a moderation queue.

For users that register on our website (if any), we also store the personal information they provide in their user profile. All users can see, edit, or delete their personal information at any time (except they cannot change their username). Website administrators can also see and edit that information.

What rights you have over your data

Suggested text: If you have an account on this site, or have left comments, you can request to receive an exported file of the personal data we hold about you, including any data you have provided to us. You can also request that we erase any personal data we hold about you. This does not include any data we are obliged to keep for administrative, legal, or security purposes.

Where your data is sent

Suggested text: Visitor comments may be checked through an automated spam detection service.

Save settings
Cookies settings